Solution to Your Ploblem
TOP TECHNO Co.,Ltd solves your ploblem as follows, based on many experiences,
results from joint research with AIST, and results from polishing tests
by our test polisher.
Esimate
of sample
test
Consultation
Inquiry
・want to know about electro-abarasive polishing
・want to improve roughness
・want to challenge to nano meter level surface
・want to be worked by electro-abrasive polishing
・want to introduce polisher etc.
・TOP TECHNO Co.,Ltd
president Tsukasa HARADA
tel +81-299-87-1420/fax +81-299-82-9380
→
・acceptable sample size
flat sheet:max300×300×100mm
inside of small pipe:1〜50φ×150L
outside of mediumu pipe:20〜300φ×300L
curved surface:according to consultation
・weight:max5kg
・estimate of sample test according to your request
1-4-6 Takamagahara, Kashima-city, Ibaraki-pref.
314-0005, Japan
・your visit to our office and looking at polishing
sample and test polisher, then consultation with
your samples.
・our visit to your office and looking at your
samples or equipments.
・consultation based on many experience or
various data from joint research with AIST.
Sample
test
・presentation before sample test
・select type of polisher depending on material, shape, size, aim of roughness
etc.
・making tool electrode and jig, selection of abrasive
・decision of test condition, as current density, holding pressure, rotating
speed, time etc
・practice of test and measuring(roughness, photo
by microscope etc)
・test report and return of sample
Introducion
of polisher
・consideration of introduction of
polisher based on sample test
・engineering of polisher
・TOP TECHNO practices engineering of polisher,
as plannnig, design, manufacturing,construction,
and trial test.